Rear camera installation (connections) manual

Congratulations on purchasing our BMW Android Screen Rear View Camera! This manual will guide you through the installation (connections) process step by step.

Your rear camera comes with a 2-year warranty. If you experience any issues or need additional assistance, please contact our technical support team via WhatsApp or email.

Remember that you can request assistance during the installation process by making an appointment with our technical support team via WhatsApp or email.

1. Connection

✏️ [Important] If your BMW has an automatic gearbox, we will make the connections at the rear end, but we will NOT connect it to positive or ground, we will leave them isolated with insulating tape. If it does not work, then we will connect it to positive and ground.

Rear end (pilot): We make the RCA connection (yellow male/female connector) and then we proceed to join the red cables and connect them to the positive cable of the reverse light. Next we join the negative cables and connect them to ground (car plate).

Front end (screen): We connect the red wire to the screen's reversing trigger and make the RCA connection to the screen's camera video input.

Attention! All connections must be insulated with electrical tape.

2. Problems and solutions

- The image is seen upside down or in mirror mode
In camera settings disable the mirror/inverted image option.

- Sometimes the image is only displayed for a few seconds or appears with lines (blurry/interference)
You must install a filter [ to purchase click here ] between the camera and pilot/ground connections.